StarLab ErgoOne FAST Bedienungsanleitung Seite 9

2.4 Materials
NOTICE! Aggressive substances may damage the ErgoOne® FAST and
accessories. Check the chemical resistance before using organic solvents or
aggressive chemicals. Observe the cleaning instructions.
The pipette controller assemblies are composed of the following materials:
Component
Housing, aspirating cone, aspiration button,
dispensing button, membrane filter housing,
wall holder
Filter adapter
Pipette adapter
Filter membrane
Seal for filter adapter
Tubes and valves
Battery status display
The ErgoOne® FAST is resistant against UV-light. UV-light can therefore be used for de-
contamination of the pipette controller.
2.5 Features
The ErgoOne® FAST is a battery-driven pipette controller. You can use glass or plastic
pipettes in a volume range of 0.1 ml to 100 ml.
A pump generates underpressure or overpressure to aspirate or dispense the liquid. The liquid
can also be dispensed solely via the atmospheric pressure. The aspirating and dispensing
speed is controlled by how far the control buttons are pressed in.
Material
Polypropylene (PP)
Polytetrafluoroethylene (PTFE)
Silicone
Polytetrafluorethylen (PTFE)
Hydrated acrylonitrile butadiene rubber (HNBR)
Polymer fluorine rubber (FKM), polybutylene
terephthalate (PBT), polyphenylene sulfide
(PPS), silicone
Cyclic olefin copolymer (COC)
ErgoOne FAST · Manual · 9
®