Proceed As Follows; Preserving The Battery Capacity; Long Periods Without Operation - With Charging Stand; Long Periods Without Operation - Without Charging Stand - StarLab ErgoOne FAST Bedienungsanleitung

Proceed as follows:

Fig. 2: Loading the rechargeable battery

5.1.1 Preserving the battery capacity

The battery capacity can be preserved over its service life to a great extent.
5.1.2 Long periods without operation –
with charging stand
› T he pipette controller can be stored, connected to the charging stand.
The battery charge will be automatically monitored and recharged.
5.1.3 Long periods without operation –
without charging stand
1. C ompletely charge the battery beforehand if the pipette controller is not to be used for
a period longer than 4 weeks.
2. The battery should be completely recharged every 2 months.
16 · ErgoOne FAST · Manual
®
1. Connect the power supply to the mains
power socket.
2. Insert the charging plug of the power
supply into the connector socket.
The charging time depends on the char-
ging state of the rechargeable battery.
For a fully discharged rechargeable
battery, this is about 3 hours.
You can continue using the pipette
controller during the charging process.
3 h