Dispensing Liquid; Flow-Out - StarLab ErgoOne FAST Bedienungsanleitung

5.6 Dispensing liquid

Consider the type of pipette used.
After liquid dispensing, hold class AS quick-drain pipettes on the tube inner wall
for 5 seconds to allow the liquid to drain.

5.6.1 Flow-out

A valve will be opened during flow-out. The liquid drains from the pipette as a result of
atmospheric pressure.
≤ 4 mm
Fig. 7: Allowing liquid to flow-out
22 · ErgoOne FAST · Manual
®
1. H old the pipette vertically and place
it on the tube inner wall.
2. Press the dispensing button lightly.