Fast Mode - Heidolph Hei-TORQUE Core Betriebsanleitung

Operation
➜ If the rotational movement is stopped before the timer has expired, it is stopped
and continues running when the rotational movement restarts.
➜ If the timer time expires normally (no interruption due to manual stopping of the
rotational movement), the rotational movement is stopped automatically and the
timer is reset to the set time, e.g. 60 s.
➜ If the rotational movement is restarted after the timer expired normally, the timer
is restarted with the set time.
While the timer is running, the remaining time is shown on the
display to the nearest second. At the same time, the timer symbol
appears on the left at the top of the screen.
To deactivate the timer, it must be switched to [
Settings menu.

Fast mode

With this function, the device can be set for a certain time to the maximum speed of
2,000 rpm with the press of a button:
Fast mode
➜ Press the [
– The rotation speed is increased to and kept at 2,000 rpm.
Fast mode
➜
Let go of the [
ously set value.
The fast mode function can be activated at any time and inde-
pendently of the operating state. I.e., the stirrer tool starts, from
a standstill if applicable, as soon as the [
pressed.
Fast mode phases are not recorded in timer mode.
] button on the front of the device and keep it pressed:
] button to reduce the rotation speed back to the previ-
48
OFF
] via the
Fast mode
] button is