Cleaning And Maintenance - Stocker Magma E-100 TR Benutzerhandbuch

7
1. If the lopper stop working during long term use and you hear 4 fast beeps, this is an indica-
tion of undervoltage protection which means the battery is depleted. Please charge as soon
as possible.
2. In order to conserve the use of battery power and ensure that the lopper have the longest
service life, do not overload the device and avoid cutting branches with a diameter larger
than 35 mm.
3. During the shearing process, if the shearing knife encounters a branch that cannot be cut off,
then release the trigger to reopen the blades, after which the next normal shear session can
be carried out.
The blades of the lopper should not be moved around while cutting, so as not to
damage the blades. Never move the lopper side to side when wedged.
Reading the LED display
To determine the battery charge level, the lopper is equipped with 4 LEDs located under the
power button. As they go from green to red, it means that the battery is running out.
After 2 year of intensive operation, we recommend a comprehensive inspection
and maintenance of the shears. Please contact your local reseller.
130
Art. 612 / Art. 613
Lopper Magma E-100 and E-140 TR
Usage
Art. 612 / Art. 613
Lopper Magma E-100 and E-140 TR
Usage
Audible tone notifications
Beeps Interval Description
1 time On or off
1 time Blades opened or closed
3 times 0,1 seconds Security lock/unlock
4 times 0.1 seconds The battery is running out. Please charge as soon as possible.
8 times 0.1 seconds If the branch can't be cut off 10 times incessantly

Cleaning and maintenance

When carrying out cleaning and maintenance operations, always make sure that the
lopper is switched off, the battery is disconnected and the blades are closed.
Components of the tool box
Tool
Large allen wrench
Small allen wrench
Medium allen wrench
Large allen wrench
XL allen wrench
Screwdriver
Sharpening corundum stone
For further information about the product, please contact info@stockergarden.com
Function
Fastening the blade
Open inspection cover
Unscrew blade's locking screw
Unfasten clip bolt
Unfasten central bolt
Unscrew all screws of the machine body
Blade's sharpening
7
8
131