Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7
General instructions
Normally, the cuttings are even and smooth causing no damage to the plants. If an abnormality
occurs, simply release the trigger and the blade will open in the maximum position to avoid
personal injury or property damage. Do not use the device on rainy days. Before using, please
check if the blade is sharp. If the blade is blunt, be sure to sharpen the blade to obtain optimal
performance and avoid damages to the lopper. Always close the blades before switching the
lopper off, in order to avoid any damages to things or people.
Charging the battery
Do not expose the battery to extreme conditions such as high temperatures or shocks.
Otherwise, personal injury will result from leakage of the electrolytic solution.
Before using or recharging the batteries, make sure that the battery and the battery
charger are both dry.
•
At the time of delivery, the battery of this product is not fully charged. Therefore, the user must
fully charge it before using it for the first time.
•
Do not charge the battery for a long time, and avoid using all the power in the battery, otherwi-
se the battery will be damaged.
•
If the battery life of the fully charged battery is significantly shorter, it proves that the battery
has been used up and must be replaced. Users can only use original batteries. In order to
obtain a new battery, users can contact a local reseller or Stocker srl.
•
Always keep in mind the applicable safety instructions, environmental regulations and environ-
mental information.
•
Place the charger in a room between 10 °C and 22 °C at room temperature to prevent
moisture ingress.
•
Check if the switch is in the off position.
•
Connect the charger's adapter to the appropriate connector of the battery pack.
•
Make sure the power supply matches the rating on the charger and adapter.
126
Art. 612 / Art. 613
Lopper Magma E-100 and E-140 TR
Usage
Art. 612 / Art. 613
Lopper Magma E-100 and E-140 TR
Usage
•
When the red light on the charger is on, it indicates that the battery is charging, and the green
light indicates that charging is complete. The average charging time is 2 hours.
•
When charging is complete, unplug the connector from the power source and disconnect the
connector from the battery.
•
Please ensure that the battery is charged at least once every six months when the battery is
not in use for a long time.
Working conditions
1.
Keep the charging temperature of the charger and battery pack between 0°C ~ 45°C, and
the battery pack discharge temperature between - 10 °C ~ 60 °C.
2.
The working temperature of the lopper - 5 °C ~ 30 °C.
Proper use of the battery charger
Before using or recharging the batteries, make sure that the battery and the battery
charger are both dry.
1.
Only use the supplied charger to charge the battery. Failure to do so may result in fire or
explosion. Use the matching charger to ensure the safety of the device.
2.
Check the charger, cord and plug before each use. If it is damaged, please have it repaired
by qualified personnel and use original parts. Do not use a defective charger and turn it on
yourself to ensure the safety of the device.
3.
The link socket of the charger must be grounded. Make sure that the power supply voltage
matches the rating of the nameplate on the charger. Otherwise, there may be an electric
shock.
4.
Disconnect the charger from the power source before closing or opening the connection to
the battery.
5.
Keep the charger clean and away from rain. Do not use the charger outdoors. The ingress of
For further information about the product, please contact info@stockergarden.com
7
127
Werbung
Inhaltsverzeichnis
