Scan Function - geo-FENNEL FL 245HV Bedienungsanleitung

EN

SCAN FUNCTION (12)

Press button (12) to change from the rotation to the scan mode:
Press button 1 x = long scan line
Press button 2 x = short scan line
Press button 3 x = dot mode
SCAN DIRECTION (13)
Change the direction of the scan mode with button (13).
LED (14) - REMOTE CONTROL
This LED flashes if any button is used and a beep sounds.
ON / OFF REMOTE CONTROL FUNCTION - REMOTE BUTTON (14)
With this button the remote control can be powered off - but not the instrument.
Press the ON/OFF button of the remote; the instrument will be in standby function. The ON/OFF LED
of the laser flashes. The values set will remain.
ROTATING SPEED - REMOTE BUTTON (16)
The instrument standardly rotates with max. speed (= 800 rpm). Press button (16) to change to 300
rpm.
If the batteries of the remote are empty each key pressure will cause a permanent sound.
22