Accessories; Manual Function - geo-FENNEL Geo4-XR GREEN Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

ACCESSORIES

20 mm fix-height adapter with 1/4"

for use on the floor direct

for connection to a tripod with 1/4"

fix height: 20 mm from the bottom

line to the laser plane

If the instrument is in OFF position press the button MANUAL function to enter into the MANUAL

mode; the ON/OFF LED is illuminated, the MANUAL LED is blinking. Now the instrument can be

used in slope mode, the compensator alarm is off. All lines can now be switched as in standard mode.

Switch off the MANUAL function with the button MANUAL function

USE WITH RECEIVER

To prolong the working range or at unfavourable light conditions Geo4-XR GREEN can be used with an

optional receiver (not included in this kit).

Switch on the desired laser lines and press the button receivng mode at the laser (the LED for the

corresponding lines flashes).The selected laser lines can now be deteced by the receiver

(the visibility of the laser lines is weaker in this mode).

By use of the receiver the working range can be extended up to 60 meters. For more detailed inform-

ation please see the user manual of the receivers.

Press the button receiving mode again to quit this mode.

Height checking pins

checking of floor flatness by use

of height-check pins

Inhaltsverzeichnis