8.2.1 Subsequent tare weight
The balance can be tared several times successively.
8.2.2 Pretare
The possibility exists to enter either a known pre-tare value via the keyboard or to
store the weight of an object placed on the weighing plate as a pre-tare value.
Store the weight of an object placed on the weighing plate:
TMPN_A-BAPS-e-2210
Start balance by pressing
Wait for stability display
Place the object whose weight shall be stored as a pre-tare
value, on the weighing plate. (in this example „1.3 kg")
Press
and keep it pressed, the application menu is
called up. „ApcMen", followed by „WghMod" is displayed
Then „PtArE" appears automatically.
Acknowledge by
Acknowledge by
flashing.
Press
again, „ActuAL" appears anew, „PT" and „M1"
stop flashing
Press
again, „Wait" appears shortly, the weight placed
on the weighing plate at this moment, will be taken over as
pre-tare value. The scales will change to zero display. "NET"
appears.
.
.
, „ActuAL" will be shown.
, in the display „PT" and „M1" appear
29