Affixing The Height Meter - KERN MPN-Serie Betriebsanleitung

7.4.1 Affixing the height meter

The force necessary for extending the telescopic height meter can be adapted with
the help of two adjustment screws on the tripod (see fig.).
For this purpose proceed as follows:
 Retract the height meter
completely into the tripod
 Remove the two plastic plugs on
the lower side of the tripod
 Using a suitable slotted screw
driver turn the two adjustment
screws to adjust the desired effort
 (if frequently used, this procedure
possibly has to be repeated after
a certain time)
Once installation is complete, check all screws for tight fit. Otherwise the
person to be weighed may suffer an injury.
22 TMPN_A-BAPS-e-2210