Balance Assembly And Installation - KERN MPN-Serie Betriebsanleitung

7.4 Balance assembly and installation

Refitting Procedure:
 Mount tripod (1) on tripod
holder (2) at weighing
platform
Ensure that the cable (3)
does not get clamped!
 Fasten tripod, using 4 screws
Once installation is complete, check all screws for tight fit. Otherwise the
person to be weighed may suffer injury.
20
 Level balance with foot screws until the air bubble of the
water balance is in the prescribed circle.
 Check levelling regularly
TMPN_A-BAPS-e-2210