10.2 Data output after pressing the PRINT button < manual >
Activate function:
In Setup menu invoke the menu setting <Print PrMode> and confirm
For a manual data output select the menu setting < manual > with the
with button .
navigation keys and confirm on the button.
Use the navigation keys to select the setting < on > and confirm on button.
To exit the menu press the navigation key repeatedly.
Place goods to be weighed on balance:
If required, place empty container on scale and tare.
Place goods to be weighed. The weighing value is edited by pressing the PRINT-
button.
10.3 Automatic data output < auto>
Data output happens automatically without having to press the PRINT-key as soon
as the corresponding output condition has been met, dependent on the setting in the
menu.
Enable function and set the output condition:
In Setup menu invoke the menu setting <Print PrMode> and confirm
with button .
For an automatic data output select the menu setting < auto > using the
navigation keys and confirm by the button.
Use the navigation keys to select the setting < on > and confirm on
button. < zRange> is displayed.
Acknowledge by -button and set the required output condition with the
navigation keys .
Acknowledge by -button.
To exit the menu press the navigation key repeatedly.
Place goods to be weighed on balance:
If required, place empty container on scale and tare.
Place weighed goods and wait until the stability display (
The weighing value is issued automatically.
TMPN_A-BAPS-e-2210
) appears.
45