Enter the pre-tare value manually via the keyboard:
30
Start balance by pressing
Wait for stability display
Press
and keep pressed, the application menu is
called up. „ApcMen", followed by „WghMod" is displayed
Then „PtArE" appears automatically.
Acknowledge by
flashing.
Now select the desired memory location between 1 and 4
using button
Press
again , „ActuAL" is displayed.
Press
, "ManuAL" is displayed.
Press
, the display to enter the pre-tare value appears
flashing. Enter numeric values using
press
to change over to the next decimal digit and
finally acknowledge the entered value.
The balance changes into the weighing mode, the entered
pre-tare value is displayed with a minus as a negative value.
.
.
, in the display „PT" and „M1" appear
.
TMPN_A-BAPS-e-2210
and
,