Continuous Data Output - KERN MPN-Serie Betriebsanleitung

10.4 Continuous data output < cont >
Enable function and set the output interval:
In Setup menu invoke the menu setting <Print PrMode> and confirm

on  button.
For a continuous data output select the menu setting < cont > using the

navigation keys  and confirm on  button.
Use the navigation keys  to select the setting < on > and confirm on 

button.

<speed> is displayed.
 Acknowledge by -button and set the required time interval using the
navigation keys 
To exit the menu press the navigation key  repeatedly.

Place goods to be weighed on balance
 If required, place empty container on scale and tare.
 Place goods to be weighed.
 The weighing values are issued according to the defined interval.
Sample log (KERN YKB-01N):
46
The balances which have a serial interface, may only be connected
to electrical office machines.
TMPN_A-BAPS-e-2210