TomTom WORK LINK 310 Installationshandbuch Seite 15

After you have successfully tested the
operation of the TomTom LINK 310 (see
Testing operation on page 12) and connected
to the TomTom GO 7000 and TomTom
WEBFLEET (see Connecting to GO and
WEBFLEET on page 15), you can now close
the TomTom LINK 310 with the plastic seal.
IMPORTANT: Once you have closed the TomTom
LINK 310 with the plastic seal, the device cannot be
opened again without damaging the seal.
For this, slide the plastic seal over the plug of
the power cable into the housing and press
gently until it engages.
Closing the TomTom LINK 310
Closing the
TomTom LINK
310
17
EN