Initial Operation; Cable Retainer; Preparing Eggs - Silvercrest SED 400 A1 Bedienungsanleitung

Initial operation

Before starting to use the appliance, ensure that...
– the appliance, power plug and mains cable
and...
– all packaging materials have been removed from the appliance .
1) Clean all parts of the appliance as described in the section entitled "Cleaning
and care" .
2) Unwind the mains cable
through the recess on the edge .
3) Insert the plug into a suitable mains power socket .
The appliance is now ready for use .

Cable retainer

There is a cable retainer
you to adjust the length of the cable
CAUTION – PROPERTY DAMAGE!
► Ensure that you always guide the mains cable
ing gap in the rear of the appliance base
NOTE
► Always wrap the power cable
wise direction . This reduces the length of the cable to a minimum, allowing
you to guide the mains cable

Preparing eggs

1) Pick a hole in the bottom of the egg with the egg pick
inside the egg to dissipate as it expands during boiling . It prevents the shell
from bursting open . The hole you pierced previously should point upwards
when you place the eggs in the cooking insert
2) Place up to 7 eggs on the cooking insert
3) Fill the measuring cup
water into the cooking bowl
4) Place the cooking insert
■ 8
│ GB│IE
from around the cable retainer
on the base of the appliance . This retainer
to your requirements .
for the sake of stability .
around the cable retainer
through the gap in the appliance base
with the picked side up .
up to the MAX marking with tap water and tip this
.
into the cooking bowl
are in perfect condition
and guide it
allows
through the correspond-
in a clock-
. This allows the air
.
and place the lid on top .
SED 400 A1
.