Toshiba TOSVERT VF-S15 Schnellstartanleitung Seite 46

Terminal Terminal Input / Input /
symbol symbol output output
F F Input Input
R R Input Input
RES RES Input Input
S1 S1 Input Input
S2 S2 Input Input
S3 S3 Input Input
Common Common
CC CC to Input / to Input / Control circuit's equipotential terminal (3 terminals) Control circuit's equipotential terminal (3 terminals)
output output
PP PP Output Output Analog power supply output Analog power supply output
Multifunction programmable analog input. Multifunction programmable analog input.
Default setting: 0-10Vdc (1/1000 resolution) and 0-60Hz (0-50Hz) Default setting: 0-10Vdc (1/1000 resolution) and 0-60Hz (0-50Hz)
V I A V I A
frequency input. frequency input.
Input Input
Note 1) Note 1)
By changing parameter f109, this terminal can also be used as a By changing parameter f109, this terminal can also be used as a
multifunction programmable logic input terminal. multifunction programmable logic input terminal.
Multifunction programmable analog input. Multifunction programmable analog input.
Default setting: 0-10Vdc (1/1000 resolution) and 0-60Hz (0-50Hz) Default setting: 0-10Vdc (1/1000 resolution) and 0-60Hz (0-50Hz)
frequency input. frequency input.
V I B V I B
The function can be changed to -10-+10V input (1/2000 resolution) by The function can be changed to -10-+10V input (1/2000 resolution) by
Input Input
parameter f107 =1 setting. parameter f107 =1 setting.
Note 1) Note 1)
By switching slide switch SW2 and changing parameter f109 setting, By switching slide switch SW2 and changing parameter f109 setting,
this terminal can also be used as a multifunction programmable logic this terminal can also be used as a multifunction programmable logic
input terminal. input terminal.
Multifunction programmable analog input. Multifunction programmable analog input.
V I C V I C Input Input
4-20mA (0-20mA) input. 4-20mA (0-20mA) input.
Multifunction programmable analog output. Default setting: output Multifunction programmable analog output. Default setting: output
frequency. frequency.
FM FM Output Output The function can be changed to meter option (0-1mA), 0-10Vdc voltage The function can be changed to meter option (0-1mA), 0-10Vdc voltage
or 0-20mAdc (4-20mA) current output by parameter f681 setting. or 0-20mAdc (4-20mA) current output by parameter f681 setting.
Resolution Max. 1/1000. Resolution Max. 1/1000.
Function Function
Shorting across F-CC or P24-F causes forward rotation; open Shorting across F-CC or P24-F causes forward rotation; open
causes deceleration stop. causes deceleration stop.
(When Standby ST is always ON) (When Standby ST is always ON)
3 different functions can be assigned. 3 different functions can be assigned.
Shorting across R-CC or P24-R causes reverse rotation; open Shorting across R-CC or P24-R causes reverse rotation; open
causes deceleration stop. causes deceleration stop.
(When Standby ST is always ON) (When Standby ST is always ON)
3 different functions can be assigned. 3 different functions can be assigned.
This inverter protective function is reset if RES-CC or P24-RES is This inverter protective function is reset if RES-CC or P24-RES is
connected. Shorting RES-CC or P24-RES has no effect when the connected. Shorting RES-CC or P24-RES has no effect when the
inverter is in a normal condition. inverter is in a normal condition.
2 different functions can be assigned. 2 different functions can be assigned.
Shorting across S1-CC or P24-S1 causes preset speed operation. Shorting across S1-CC or P24-S1 causes preset speed operation.
2 different functions can be assigned. 2 different functions can be assigned.
Shorting across S2-CC or P24-S2 causes preset speed operation. Shorting across S2-CC or P24-S2 causes preset speed operation.
By changing parameter f146 setting, this terminal can also be By changing parameter f146 setting, this terminal can also be
used as a pulse train input terminal. used as a pulse train input terminal.
Shorting across S3-CC or P24-S3 causes preset speed operation. Shorting across S3-CC or P24-S3 causes preset speed operation.
By changing slide switch SW2 and parameter f147 setting, this By changing slide switch SW2 and parameter f147 setting, this
terminal can also be used as a PTC input terminal. terminal can also be used as a PTC input terminal.
45
10 10
E6582383 E6582383
E6582383
Electrical Electrical
specifications specifications
No voltage No voltage
logic input logic input
24Vdc-5mA or 24Vdc-5mA or
less less
Sink/Source and Sink/Source and
PLC selectable PLC selectable
using slide switch using slide switch
SW1 SW1
(Default setting is (Default setting is
Sink side) Sink side)
Pulse train input Pulse train input
(S2 terminal) (S2 terminal)
Pulse frequency Pulse frequency
range: range:
10pps~2kpps 10pps~2kpps
Duty: 50±10% Duty: 50±10%
PTC input PTC input
(S3 terminal) (S3 terminal)
- -
10Vdc 10Vdc
(permissible load (permissible load
current: 10mAdc) current: 10mAdc)
10Vdc 10Vdc
(internal (internal
impedance: 30kΩ) impedance: 30kΩ)
10Vdc 10Vdc
(internal (internal
impedance: 30kΩ) impedance: 30kΩ)
4-20mA 4-20mA
(internal (internal
impedance: 250Ω) impedance: 250Ω)
1mAdc full-scale 1mAdc full-scale
ammeter or ammeter or
QS6T(option) QS6T(option)
0-20mA (4-20mA) 0-20mA (4-20mA)
DC ammeter DC ammeter
Permissible load Permissible load
resistance: resistance:
600Ω or less 600Ω or less
0-10V DC volt 0-10V DC volt
meter meter
Permissible load Permissible load
resistance: resistance:
1kΩ or more 1kΩ or more