Operation - profi-pumpe DP01136-4 Bedienungsanleitung

4. OPERATION

The installation must be performed by a qualified professional.
Please, check each time before using, the electrical connections and the cables are not damaged. Also, it
is NOT recommended to perform, for example, a cable extension. It is not certain whether this modification
is technically correct, so this warranty is void. It must be ensured that the pump is sufficiently cooled during
prolonged operation.
Diesel pumps are electrical products, which have to be protected against outer influences, f.e. caused by weather.
Only use the pump in well-ventilated rooms and areas with enough fresh air. The floor, on which the pump may be
used, should be flat. Please keep enough space from walls.
The specified suction lift is the maximum suction at optimal conditions. Do not reduce the cross area of suction and
discharge lines.
Installation of the barrel pump
1. Connect all parts correctly and ensure outlet connections are in proper placement.
2. Insert full batteries into the battery compartment. Turn on the pump by use the on/off swich.
3. Refuel as usual.
4. When fueling is complete, return the nozzle to its storage position and turn off the pump.
Structure and dimensions
Connection / Use
Schematic representation
as application example.
Please refer to the
quotation description for
the scope of delivery.
English 02