Herunterladen Inhalt Inhalt Diese Seite drucken

Inhaltsverzeichnis; Introduction; In General; Ranges Of Application - profi-pumpe BAU-Star 180-1 Bedienungsanleitung

Schmutzwasser tauchpumpen
Vorschau ausblenden Andere Handbücher für BAU-Star 180-1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2 English
Contents
1. Introduction ........................................................................................................................... 2
2. In general .............................................................................................................................. 2
3. Ranges of application ............................................................................................................ 3
4. Operation .............................................................................................................................. 3
5. Installation ............................................................................................................................ 3
6. Security tips............................................................................................................................ 5
7. Servicing ............................................................................................................................... 5
8. Guarantee regulations ........................................................................................................... 5
9. Recognising and repairing of mistakes ................................................................................. 6
10. Notes on Product Liability ..................................................................................................... 6
11. Notes on Disposal ................................................................................................................. 6
12. EU Declaration of Conformity ................................................................................................ 7
13. Technical Data ..................................................................................................................... 14
SAfETy INSTRUCTION AND WARNINGS
Please read the user manual
before using the device
Warning sign

1. INTRODUCTION

We would like to congratulate you on the purchase of our pump. We appreciate your trust.
That's why funtional security and operational safety stands by us on first place.
To prevent damage to persons or property, you should read this user manual
carefully. Please observe all safety precautions and instructions for proper use
of the pump. failure to follow the instructions and safety precautions can result
in injury or property damage.
Please keep this manual with the instructions and safety instructions carefully
in order to at any time you can restore them. Please always download the latest
version of the user manual of www.profi-pumpe.de under „downloads". This
shall always prevail.

2. IN GENERAL

The pumps are developed according to the newest stand of technology, manufactured with
much care and go under strict intensive controls.
These pumps were optimised by us in particular for the special demands in dirty water areras.
Make sure after unpacking the pump that the data given on the type label match with the inclu-
ded operating instructions. In case of doubt the pump is not to be used.
Transport damages are immediately to be reported to the package distributor and to us in writ-
ten form.
Pull power plug
Warning of electrical voltage

3. RANGES Of APPLICATION

These pumps are made for pumping clean and dirty water. Free of abrasive components (sand,
mud, aggressive chemical substances).
The pumps are made for the following ranges of application:
l Filling and emptying rain tanks and containers
l For water re-circulation
l For rainwater use in house and garden
l Pumping water from a brook a stream
l Use in a pond
l Others
IMPORTANT!
The pumps are designed for pumping water and chemically non-aggressive liquids. Any guaran-
tee is void in case of improper use. They are not suitable for pumping flammable liquids or for
use in places where there is danger of an explosion. The pumps are designed for home use in
the house and garden.
In continuous operation mode, the lifetime will be shortened accordingly. Never run more than
5 minutes against a closed valve pump. Save the pump against dry running (install dry run
protection).
Never start and stop the pump more than 20 times per hour. When the pump clocks, any
claim under warranty is void. Not suitable for use with solar photovoltaic panels.
Submersible pumps may not be used in swimming pools.

4. OPERATION

The installation must be performed by a qualified professional.
Please, check each time before using, the electrical connections and the cables are not
damaged. Check before the installation whether the electrical connections are earthed
according to the statutory regulations and are installed. The pump is to be secured
through a RCD circuit breaker with release current of 30 mA. is technically correct, so
this warranty is void. It must be ensured that the pump is sufficiently cooled during pro-
longed operation.
It is not recommended to perform even cable extensions or other technical modifications. The
lines to the pump must be installed always steadily rising. A transfer of mechanical loads or
vibrations from the pump or must be eliminated through appropriate measures (rubber buffers,
braided hoses, line fixation, etc.).If necessary, attach a sufficiently long and strong rope to the
attachment points provided before using the pump. The pump is hung into the water tank with
this retaining cable.
Note: The condition of the holding rope should be checked regularly, as it can age
over time and may tear if necessary.
l Connect the pressure line:
For occasional use a suitable water hose can be used.
For permanent installation, it is recommended to connect a reinforced hose.
l Mount the pressure line on the pressure connection. All threaded connections must be sealed
with a suitable sealing tape (e. g. Teflon® tape).
l When using a hose, screw a suitable hose adapter onto the pressure connection, slide the
hose firmly onto the hose adapter and secure it with a hose clamp.
l For the maximum immersion depth, please refer to the technical data (page 8).
l Make sure that the intake openings are not blocked by foreign bodies. If necessary, place the
unit on a firm, level surface.
l Make sure that the device is securely attached.
English 3

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bau-star 750-1Bau-star 2200-4Bau-star 4000-4Bau-star 7500-4P-abg180-1P-abg750-1 ... Alle anzeigen

Inhaltsverzeichnis