Comprag DV9010 Bedienungsanleitung Seite 19

LED indicators.
When switched on, the LCD display shows the following:
COMPRAG SCREW
AIR COMPRESSOR
The main parameters of the compressor are displayed after 5 seconds:
21°C
0.0BAR
STOP
0.00V
Main menu: Click
RUN PARAMETERS
USAGE PARAM
FACTORY PARAM
Description of the parameters. Run parameters:
Select the run parameters using the up
are displayed.
FAN, VSD PARAM
TOTAL RUN TIME
THIS RUN TIME
MAINTEN. PARAM
ERRORS HISTORY
MFD, SERIAL NO
THIS ERROR
DESCRIPTION
Run parameters. Select the run parameters using the up
FAN, VSD PARAM
FREQUENCY 50.0 Hz
VOLTAGE
CURRENT:
POWER:
FAN CURRENT (A)
А:
В:
С :
+7 (800) 777-83-75(звонок бесплатный)
www.v-p-k.ru
Oil/air mixture temperature at the Current motor frequency
0.00HZ
compressor outlet
0RPM Pressure at the compressor outlet
Operating status of the compressor
O.0kW Current mains voltage
in order to bring up the options menu:
Includes current values (available for viewing)
Includes operating settings of the main parameters (available for viewing,
changes password-protected)
For servicing mode (view with password). Modification only possible by manufacturer
At the output of the frequency inverter.
400V
Current consumption of all 3 phases of the fan.
0.0
0.0
0.0
Current motor speed
Current power consumption of the
compressor
and down buttons and enter
and down
. Current values
buttons and enter
DV9010
.