Monsher MHI 3001 Bedienungsanweisung Seite 45

English
A (mm) B (mm)
760min 50min
Make sure the induction cooker hob is well ventilated and that air inlet and outlet are
not blocked. In order to avoid accidental touch with the overheating bottom of the hob,
or getting un-expectable electric shock during working, it is necessary to put a wooden
insert, fixed by screws, at a minimum distance of 50mm from the bottom of the hob.
Follow the requirements below:
; There are ventilation holes around outside of the hob. YOU MUST ensure these holes
are not blocked by the worktop when you put the hob into position.
; Be aware that the glue that join the plastic or wooden material to the furniture, has
to resist to temperature not below 150
; The rear wall, adjacent and surrounding surfaces must therefore be able to
withstand an temperature of 90
C (mm)
20min Air intake 50mm
C. to avoid the unstuck of the paneling.
0
C.
0
Precautions
;
be installed by qualified personnel or
technicians. We have professionals at
your service. Please never conduct the
operation by yourself.
D
The induction hotplate must
45 45
E
Air exit 50mm