Monsher MHI 3001 Bedienungsanweisung Seite 39

English
3.7 Timer
You can use timer function by below two ways:
a) You can use it as a minute reminder. In this case, the timer will not close any
cooking area at the set time.
b) You can also set it to turn off one or more heating zones after the setting time
Setting the shutdown timer
In working state, select the heating zone which you want to set timer .
(For example:3#heating zone)
Press "Timer" to set time, display will show and flash "10".
Press "-" or "+" one time, it will decrease or increase by 1 minute. Long press
and hold the button, will decrease or increase 10 minutes every time.(
Set the "ones and tens digits" of the timer digital display to «0» respectively
through the slider touch control to cancel the timer.
After setting the timer, the decimal point of the single digit display of the
burner which is set timer will be light on. And the two digits display will
show the minimum timing among all the timers.
When a heating zone is set a timer and the heating time reaches the set timer, the
heating zone automatically sets the power level to 0, and the power output is turned
off.
The above pictures are for reference only, subject to the final product.
39 39