Cameo P2 T Bedienungsanleitung Seite 21

To remove the tube, first loosen the two knurled screws on the top and bottom of the spotlight
housing (A). Now turn the tube approximately one eighth of a turn counterclockwise (B) and
remove it from the spotlight housing (C) towards the front. To install the tube, proceed in reverse
order, making sure that the unit is correctly seated in the corresponding guides in the spotlight
housing.
A
C
B
A
INSTALL ZOOM LENS TUBE WITH DIAPHRAGM SLIDER
PLEASE NOTE:
1. Do not operate the spotlight during the assembly or disassembly of the zoom lens tube.
2. Be careful not to damage or contaminate the lens behind when disassembling or assembling
the zoom lens tube. Ensure that no foreign bodies enter the spotlight housing.
3. Do not operate the spotlight without the zoom lens tube.
Disassemble the tube with the diaphragm slider unit as described above. Place the zoom lens
tube approximately one eighth of a turn counterclockwise onto the front of the spotlight hous-
ing (A). Now turn the zoom lens tube clockwise about an eighth of a turn, making sure that the
spring-loaded locking bracket for a filter frame is facing upwards and that the unit is correctly
seated in the corresponding guides in the spotlight housing (B). Now lock the zoom lens tube
in place using the previously loosened knurled screws on the top and bottom of the spotlight
housing (C).
C
A
B
C
21