Cameo P2 T Bedienungsanleitung Seite 18

Fan = Adjust fan control
Factory = Reset to factory
Reset setting
Dimmer curves
linear
DMX value
SYSTEM INFORMATION (System Info)
Get information on device firmware, LED unit temperature and operating time. Press the encoder
to access the main menu. Rotate the encoder to select the menu item System info (observe
left selection arrow) and confirm by pushing the encoder. This will take you to the submenu for
selecting the submenu items (see table, rotate the encoder to select, push the encoder to confirm
selection). Now select the arrow symbol for "back" at the top of the submenu. Push the encoder
and access the main menu in the same way to return to the main display.
Menu
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
18
Auto
Off
Constant
Low
Constant
Mid
Constant
High
Reset Now! Restore factory settings
exponential
DMX value
Back
Automatic fan control
Deactivated fan with greatly reduced bright-
ness
Constantly low fan speed with reduced bright-
ness, if necessary
Constant average fan speed with reduced
brightness, if necessary
Constant high fan speed
Back
logarithmic
DMX value
S-curve
DMX value