The blood sample size of each test should be at least,
• blood glucose test: 0.5μL
• β-ketone test: 0.8μL
4. Apply the blood sample.
Move your finger to meet the absorbent hole of the test
strip and the drop will be automatically be drawn onto the
test strip. Remove your finger until the confirmation
window is filled. The meter begins to count down. Do not
remove your finger until you hear a beep sound.
5. Read your result.
The results of your test will appear after the meter counts
down to 0. The results will be stored automatically in the
meter memory.
(100 mg/dL = 5.5mmol/L)
Blood Glucose
Ketone warning
• When your blood glucose result is higher than 240 mg/
dL (13.3 mmol/L), the meter will display the blood glucose
as well as a Ketone warning ( flashing KETONE
reading
and " " ).
EN-10
β-Ketone