Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Getting Started
Initial Setup
Please follow the initial setup procedure before using the
device for the first time or after you have replaced the
battery. When the battery power is extremely low and "
&
" appears on the screen, the meter cannot be turned on.
Step 1: Enter the Setting Mode
1. The meter turns on automatically once a new battery is
inserted.
Note:
When you turn on the meter by pressing MAIN button for
the first time, the meter will turn off automatically due to no
data.
2. Start with the meter off (no test strip inserted). Press and
hold
and
at the same time.
Step 2: Configuring the Settings (Date, Time, Universal
Tone, Memory Deletion and Reminder Alarm)
Press
or
to adjust the value or enable/disable the
setting. Then press MAIN button to confirm the setting and
switch to another field.
Set [Year]
Set [Month]
Set [Minute]
Set [Beep On,
Universal Tone,
Beep Off ]
Set [Reminder
Set [Alarm Time
Alarm]
(Hour)]
EN-4
Set [Day]
Set [Hour]
Delete Memory
Records
Set [Alarm Time
(Minute)]
Werbung
Inhaltsverzeichnis
