Herunterladen Inhalt Inhalt Diese Seite drucken

Standard Functions - Olympus M-III 150 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8
All manuals and user guides at all-guides.com
EN

STANDARD FUNCTIONS

LOADING THE FILM
3
1
2
3. Align the film leader with the
guide line (A), and place the
film between the positioning
guides (B). Then close the
back cover until it clicks.
• The film automatically
advances to the first frame.
• Open the lens barrier until it
clicks. Make sure the
exposure counter on the
1. Slide open the back cover release
LCD panel reads " ".
upward to open the back cover.
• If "
" blinks, reload the
• Do not touch the inside of the
film.
camera, especially the lens.
2. Insert the film cartridge until it clicks
into position.
FOCUSING AND WORKING DISTANCE
This camera uses a wide multi-autofocus
system that makes it easier for the
camera to focus on subjects even if they
are not in the center of the viewfinder.
Shoot your subject from a distance of
0.6 m (2.0 ft) to ∞ (infinity) .
CLOSE-UP PHOTOGRAPHY
The picture area will move lower in the
1
viewfinder as you get closer to the
subject.
1
Close-up correction marks (picture
area at closest distance)
2
Picture area at infinity
2
6
STANDARD FUNCTIONS
TAKING PICTURES
1. Open the lens barrier until it clicks.
1
The lens will extend slightly and the
LCD panel will turn on. Push the
zoom lever to the "T" side for
telephoto (150 mm) or to the "W"
side for wide angle (37.5 mm).
• After about 4 1/2 minutes of
inactivity, the lens retracts and the
LCD panel goes out.
2. Position the autofocus marks (AF)
2
on your subject.
• Do not look at the sun or other
strong light sources through the
viewfinder.
Autofocus marks
3. Press the shutter release button
3
halfway to focus on the subject.
Make sure that the green lamp
lights; then press the shutter release
button all the way to take the picture.
After the shutter is released, the film
automatically advances to the next
frame.
AUTO FLASH — WORKING DISTANCE
(with color negative film)
When reversal film is used, the working range at the telephoto side will be
reduced by about 40%.
ISO
Wide angle (W)
Telephoto (T)
100
0.6 to 5.4 m (2.0 to 17.7 ft)
0.8 to 2.1 m (2.6 to 6.9 ft)
200
0.6 to 7.6 m (2.0 to 24.9 ft)
0.8 to 3.0 m (2.6 to 9.8 ft)
400
0.6 to 10.8 m (2.0 to 35.4 ft)
0.8 to 4.2 m (2.6 to 13.8 ft)
FILM REWINDING AND UNLOADING
The camera automatically rewinds the
film when you reach the end of a roll.
Make sure the motor has stopped and
that "
" is blinking; then open the
back cover to remove the film.
EN
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis