Troubleshooting; Storage; Disposal - Parkside PKZ 180 C5 Originalbetriebsanleitung

■ The appliance must be depressurised before all
cleaning and maintenance tasks . To do this,
open the release valve
escapes .
■ Clean the appliance regularly, preferably imme-
diately after completion of the work .
■ Clean the housing with a dry cloth – do NOT
use petrol, solvents or cleaners that can attack
the plastic .
■ Ventilation openings must never be obstructed .
NOTE
► Replacement parts not listed (such as adapter
nozzles, switch) can be ordered via our
service hotline .
► This appliance is maintenance free . Never
open the appliance . The appliance may only
be repaired by an authorised service centre
or Customer Service . If one of the faults listed
below occurs, note the following:
♦ Disconnect the appliance from any power
supply .
♦ Allow the appliance to cool down and wait a
short while for the residual energy to neutralise .
♦ Ensure that the appliance is in good working
condition .

Troubleshooting

Fault Solution
Check your power supply . Check
that all cables, fuses and the mains
socket are in working order .
Do not use excessively long exten-
Appliance
sion cables .
does not run
Do not use the appliance at
temperatures below +5 degrees .
Avoid overheating the motor .
Allow the motor to cool down .
Working Check the seals and the non-return
pressure too valve . Replace these if necessary .
low
Check the hoses, quick coupler
Tools do not
and the tools . Replace these if
work
necessary .
PKZ 180 C5
until no more air

Storage

NOTE
► Store the appliance in a dry and secure envir-
onment . Before storage, the appliance and
all connected compressed air tools should be
bled .
■ Disconnect the mains power plug and then
bleed the appliance and all connected
compressed air tools .
■ Store the appliance so that it cannot be used
by unauthorised persons .

Disposal

The packaging is made from environ-
mentally friendly material which can
be disposed of at your local recycling
plant .
Do not dispose of power tools
in the normal domestic waste!
European Directive 2012/19/EU
requires that worn-out power tools
be collected separately and recycled in an
environmentally compatible manner .
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance .
Dispose of the packaging in an environ-
mentally friendly manner . Note the
labelling on the packaging and sepa-
rate the packaging material compo-
nents for disposal if necessary . The packaging
material is labelled with abbreviations (a) and
numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites .
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product .
GB │ IE │ NI │ CY │ 9 ■