OneTouch Select Plus Bedienungsanleitung Seite 34

NOTE:
• Use only OneTouch Select
• Unlike some blood glucose meters, no separate
step to code your OneTouch Select
required.
• Make sure your meter and test strips are about the
same temperature before you test.
• Do Not test if there is condensation (water build-up)
on your meter. Move your meter and test strips to a
cool, dry spot and wait for the meter surface to dry
before testing.
• Keep test strips in a cool, dry place between 5°C
and 30°C.
• Do Not open the test strip vial until you are ready to
remove a test strip and perform a test. Use the test
strip immediately after removing it from the vial,
especially in high humidity environments.
Plus Test Strips.
®
®
33
Take a test
Plus System is
3