OneTouch Select Plus Bedienungsanleitung Seite 55

Take a test
3
After getting a blood glucose result
Once you have your blood glucose result, you may:
• Press and hold
• Press and hold
turns off. The meter will also automatically turn off if
left alone for two minutes.
Or,
• Remove the test strip and the meter will turn off.
Removing the used lancet
NOTE: This lancing device has an ejection feature, so you
do not have to pull out the used lancet.
1. Remove the lancing
device cap
Remove the cap by rotating it
and then pulling it straight off
the device.
to return to the Main Menu.
for several seconds until the meter
54