Inhaltsverzeichnis
Werbung
42
ORBITAL SANDER
The numbers in the following text refer to the
drawing on page 2
For your own safety and that of others,
we recommend that you read this
instruction manual carefully before
using this machine. Keep this instruction
manual and the documentation provided
with the machine for future reference.
Introduction
The Orbital sander is designed for dry sanding of
surfaces of wood, plastic and filler as well as for
painter surfaces.
Contents
1. MACHINE DATA
Technical specification
Voltage
Frequency
Input power
Tool class
No load speed
Lpa (Sound pressure level)
Lwa (Sound power level)
Vibration
Weight
Contents of packing
1 Orbital sander
1 Sand paper (grain 80)
1 Dust bag
1 User manual
1 Warranty card
1 Safety instructions
Check the machine, loose parts and accessories
for transport damage.
Features
Fig. 1
1. On/off switch
Ferm
Ferm
2. Handle
3. Dust bag
4. Paper clamp
5. Handle paper clamp
6. Ventilating apertures
8. Sanding sole
9. Handle (front)
10. Adjusting wheel
11.Lock-on button for on/off switch
2. SAFETY INSTRUCTIONS
Explanation of the symbols
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
The number of revolution of the machine
can be electronically set.
Wear a dust mask
230 V~
Wear ear and eye protection.
50 Hz
180 W
II
Special safety instructions
5000-10000/min
•
Contact or inhalation of dust coming free during
70.5 dB(A)
sanding (e.g. lead painted surfaces, woods and
81.5 dB(A)
metals), can endanger the health of operator
4.31 m/s
2
and bystanders. Always wear appropriate
2.4 kg
personal equipment as a dust mask and use
the dust bag during sanding.
•
Check that the switch is not in the "ON" position
before connecting the machine to the mains
voltage.
•
Always keep away the mains lead from moving
parts of the machine.
•
When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
•
Use safety glasses, especially when sanding
above your head.
Immediately switch off the machine when:
•
Excessive sparking of the carbon brushes and
verticiliosis in the collector.
GB
3
Werbung
Inhaltsverzeichnis
