Technical Specification; Safety Instructions - Ferm BGM1003 Originalbetriebsanleitung

BENCH SANDER
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europeís leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
drawing on page 2-4
Read the operating instructions carefully
before using this device. Familiarize
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Description
This machine combines all the advantages of a
horizontal and a vertical belt sander with those of
a disc sander. Its sturdy construction in cast iron
and steel makes the machine suitable for every
sanding job.
Contents:

1. Technical specification

2. Safety instructions

3. Before putting the machine into operation
4. Putting the machine into operation
5. Maintenance
1. Technical specification
Machinedata
Voltage
Power input
No load speed sander belt
No load speed sander disc
Sanding belt size
Sanding disc size
Weight
Lpa (Sound pressure level)
Lwa (Sound power level)
*S 2 = Maximum period of operation with a
capacity of 375 W
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
List of parts
Fig.1 + 6
1. Machine frame
2. Motor
3. Roller stop and parallel stop
4. Clamping handle
5. Transport roller
6. Sanding belt
7 On/off switch
8. Fence
9. Drive roller
10. Aluminium disc
11. Sanding disc
12. Work plate
13. Mitre scale
14. Supporting arm
2. Safety instructions
230 V, 50 Hz Explanation of the symbols
375 W
S 2= 30 min*
275 m/min
1400 /min
915 X 100 mm
Ø 150 mm
16.5 kg
78.6+3 dB(A)
91.6+3 dB(A)
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
EN
5