Deleting All Bluetooth Connections; Connecting Your Audio Output Device Using The Audio Cable; Operation; Controlling Playback - Medion E62474 Bedienungsanleitung

7.2. Deleting all Bluetooth connections

 Switch the headphones off.
 Press and hold the multifunction button for 10 seconds to delete all existing
Bluetooth connection information.
The switch-on signal will sound and after some time the acoustic confirmation that
all connection information has been deleted.
8. Connecting your audio output device using
the audio cable
You can use the audio cable provided to connect your headphones to any device
with a suitable audio connection (3.5 mm jack) and enable audio playback.
To do so, proceed as follows:
 Plug the audio cable jack into the AUX IN socket (7) on your headphones and
connect the cable to your audio output device.
 Start playback on the connected audio output device.
When signals are being transmitted via a cable, it is not possible to con-
trol playback using the multifunction button. In this case, you have to
rely on the controls on your audio output device.

9. Operation

9.1. Controlling playback

 Press the multifunction button (6) to start/resume playback.
 During playback, press the multifunction button to pause playback.
 Press the multifunction button twice to play the next track.
 Press the multifunction button three times to restart the current track.

9.2. Setting the volume

 Turn the multifunction button clockwise to increase the volume.
A signal sounds through the headphones when the maximum volume
has been reached.
 Turn the multifunction button anticlockwise to decrease the volume.

9.3. Managing calls/hands-free calls

When the headphones are connected to a mobile phone via Bluetooth®, you can
manage incoming calls using the multifunction button and use the headphones as
a hands-free system.
40