Getting Started; Charging The Battery; Putting The Headphones On; Switching The Headphones On/Off - Medion E62474 Bedienungsanleitung

6. Getting started

 Remove all packaging materials.

6.1. Charging the battery

 To charge the integrated battery, connect the headphones to your PC/laptop us-
ing the USB charging cable provided.
The charge level indicator (10) lights up red during charging.
 Charge the headphones for at least two hours.
The charge level indicator lights up blue when the headphones are fully charged.

6.2. Putting the headphones on

 Adjust the headband length so that the headphones (2) fit comfortably on your
head.
6.3. Switching the headphones on/off
 Press and hold the multifunction button (6) for approximately 3 seconds to
switch on the headphones.
The headphones automatically connect to the last audio device connected.
If the headphones have not yet been paired or there is no known device within
range, the headphones switch to pairing mode after 10 seconds.
The operating LED (4) flashes blue/red and the headphones start Bluetooth pairing
mode.
 Press and hold the multifunction button for approximately 5 seconds to switch
off the headphones.
The headphones automatically switch off after 5 minutes of inactivity.
When the battery charge is running low, the charge level indicator will
flash red and you will hear an acoustic signal.
You will need to charge the battery quickly if you want to continue us-
ing the headphones.
38