Operation - STIEBEL ELTRON SHZ 30 LCD Montageanleitung

2. Operation

Function buttons
! Menu selection ! Setpoint value
increase
! Rapid heating ! Setpoint value
! ECO - on / off reduction
! Reset - power
consumption display
LCD display Button Note
Rapid heating
Outlet temperature
°C
Setpoint temperature
°C
°C
„Mixed water quantity" standard display
Achievable mixed water quantity is directly dependent on the storage volume and the preset
setpoint temperature!
" After each operation, the unit switches automatically to the standard display.
"" Possible standard displays on reduction of the mixed water quantity.
"
Mixed water quantity
symbol
Heating element
symbol
! From every standard display
when setpoint temperature
< temperature current.
Heating-up display
Outlet temperature enquiry
! Adjustment range 20 - 85 °C
(max. to preset temperature
limitation)
Water heating „off"
! Setting < 20 °C
! Freezing protection active
""
< _ 10 l mixed water
quantity display
LCD display Button Note
Temperature limitation
ECO
°C
Power consumption display for water heating
kWh
Service / faults
Code enquiry
°C
Outlet temperature
< 40 °C
Outlet
temperature
symbol
Off
ECO
°C
On
ECO
Adjustment range
°C
40 °C - 65 °C
ECO symbol in the
standard display „On"
ECO
! Power consumption enquiry
(13) for water heating
! Reset: keep button pressed
for longer than 3 seconds
Service display: water
heating active
Defect display: (flashing
symbol): no water
heating
See page 18 Table 3
15