Before You Begin; Setting The Clock - Atag DX6411F Bedienungsanleitung

BEFORE YOU BEGIN

Setting the clock

EN 18
When the power is first supplied to the oven, the display on the control
panel will light briefly. After 3 seconds, you will see '12:00' in the
display.
1
2
3
4
5
Press the Clock Button.
The ' ' and '12:' will blink.
Example: to set 1:30.
Turn the Time / Temp Control Knob to
set the hour of the day.
Press the Clock Button.
The ' ' and ':00' will blink.
Turn the Time / Temp Control Knob to
set the minute of the time. '
Press the Clock Button to fi nish setting
the clock or wait for about 10 seconds.
' ' will disappear and '30' will stop
blinking. The display shows the time of
day. The appliance is now ready to use.
' will blink.