Atag DX6411F Bedienungsanleitung Seite 194

INSTALLATION AND CONNECTION
EN 16
1. Fix the oven on both sides using screws.
2. After installation, remove the vinyl protective film from the door to
the appliance and the protective film from the interior surfaces of
the oven.
Connecting to the mains power supply
• Electrical connections must be made as per the connection plate
fixed to the back of the appliance by an electrical fitter who must
ensure that the appliance has been connected up in accordance
with fitting instructions and local regulations.
Live
Neutral
• Where the appliance is not connected to the mains electricity
supply by a plug, an omni polar cutout device (with a contacts
gap of at least 3 mm) must be fitted on the supply side of the
connection to meet safety requirements.
Earth