Installation And Operation; Installation - Bartscher CI1.8L Originalbetriebsanleitung

5. Installation and operation

5.1 Installation

Unpack the device and remove all package materials according to the valid
•
environment protection regulations.
CAUTION!
Never remove the rating plate or any warning signs from the device.
Place the device on top of an even, stable, dry, and water-resistant surface which is
•
not heat sensitive.
Never place the unit on a flammable surface.
•
Never place the device at the edge of the table, it could tip or fall down.
•
Never place the device in humid or wet environment.
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
•
furnaces/electric heaters or other heat sources.
Position the device in such way that the plug is easily accessible for quick
•
disconnecting when required.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
Connect the device only to properly installed single
socket with protective terminal.
The electrical circuit in the socket must be secured to at least 16A. Only connect the
•
device directly to the wall socket; do not use any extension cords or power strips.
- 33 -