Installation And Operation; Safety Instructions - Bartscher CLUB Bedienungsanleitung

5. Installation and operation

5.1 Safety instructions

WARNING! Risk of electric shock!
The device must only be connected to a properly installed single socket with
protective contact.
Never remove the power cable by pulling the cable itself; always grab the plug
housing.
•
Never allow the power cable to come into contact with heat sources or sharp edges.
The power cable should not hang over the side of the working surface. Ensure that
no one can step on or trip over the cable.
•
The power cable must not be folded, bent or tangled, and must always remain fully
unrolled.
•
Never place the device or other objects on the power cable.
•
Do not lay the cable over carpets or heat insulations. Do not cover the cable.
Keep away the cable from operating range and do not dunk it into water.
•
Do not use the device in case it does not function properly, has been damaged or
dropped.
•
Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
•
Do not move or tilt the device when in operation.
•
Never leave the device unattended when in operation.
•
Never touch the plug with wet or moist hands.
•
Never operate the device with moist hands or while standing on wet floor.
•
The device is powered until it is disconnected from the supply system.
•
In case of fire remove the plug from the socket or disconnect the device from the
power supply before the fire extinguishing activities. Caution: Do not sprinkle the
device with water while it is still powered: Electric shock hazard!
- 23 -