Bartscher CI1.8L Originalbetriebsanleitung Seite 39

Preparation of typical (not pre-cooked) rice.
Measure the desired amount of rice according to internal pot level indicator
•
(or the table of rice/water ratio below) with use of measuring cup and wash in
the separate container.
Rice/water ratio table
Rice (non-cooked)
Amount in measuring cup
3
4
6
8
10
Indicated amounts apply for the included measuring cup.
Put the washed rice in the internal pot and pour appropriate amount of water (taking
•
into consideration the internal pot indicators or following the rice/water ratio table).
CAUTION!
Do not exceed the maximum water indicator!
Before use make sure that the external side of internal pot is dry and clean.
Put the internal pot in the external pot and rotate left and right to make sure that its
•
position on the heating plate assures good heat transfer.
Close to lid so you can hear its "click".
•
First connect the supply cable to the device, then to the earthed socket.
•
The supply cable must not pose the tripping risk.
Start the device with use of ON/OFF switch.
•
Press the function switch (move it down). The red indicator light
•
"Kochen/Cooking" comes on.
Water indicator
Internal pot
indicator 3
indicator 4
indicator 6
indicator 8
indicator 10
- 35 -