Battery Charger; Transportation, Storage And Disposal - Husqvarna 110iL Bedienungsanweisung

Problem
The product does not start.
The LED flashes 3 times again and
again.
The LED flashes 5 times again and
again.
The LED flashes 7 times again and
again.
Battery
LED display
The green LED flashes.
The error LED flashes.
The error LED is on.

Battery charger

Problem
The charging LED is red.
The charging LED flashes
green.
The charging LED flashes
red.

Transportation, storage and disposal

Transportation and storage
• The supplied Li-ion batteries obey the Dangerous
Goods Legislation requirements.
16
Possible faults
Push the power trigger and press the
start button at the same time.
Overcurrent.
Temperature deviation.
Logical error.
Possible faults
Low battery voltage.
Temperature deviation.
Too much voltage.
Cell difference is too much (1V).
Possible faults
Permanent battery charger
error.
Temperature deviation, the
battery is too cold or too hot
to use or charge.
Faulty battery.
•
Possible solutions
Release the power trigger and stop
the product.
Release the power trigger and start
the product again.
Let the product cool down.
Release the power trigger and start
the product again.
Possible action
Charge the battery.
Use the battery in temperatures between
-10°C (14°F) and 40°C (104°F).
Make sure that the mains voltage aligns with
the voltage stated on the rating plate of the
product.
Remove the battery from the battery charger.
Speak to your servicing dealer.
Possible solution
Speak to your dealer.
Let the battery cool down or warm it up. When the
battery has the correct temperature, it can be used
or charged again. Use the battery charger in ambient
temperatures between 5 °C (41 °F) and 40 °C (104
°F).
Speak to your dealer.
Obey the special requirement on package and labels
for commercial transportation, including by third
parties and forwarding agents.
1728 - 003 - 31.10.2022