Kärcher IVM 60/24-2 M ACD WS Bedienungsanleitung Seite 22

Under no circumstances should you hold
your hands between the dirt receptacle and
filter ring or allow them to come close to the
lifting mechanism while locking it.
Lock the dirt receptacle by operating the
bow handle with both hands.
ATTENTION
Missing filter element
Damage to the suction motor
Do not vacuum without a filter element.
ATTENTION
Static charge of the dirt receptacle
Ignition of dusts
Make sure that the grounding on the chas-
sis is in contact with the dirt receptacle.
1. Bring the device into the working posi-
tion.
2. Secure the device with the parking
brakes.
3. Ensure that the suction head is fitted
correctly.
4. Fill the dirt receptacle with water or oil
(order no. 9.990-272.0) up to the mark
(see chapter Fill the dirt receptacle with
inert liquid).
5. Clamp the earth terminal to the external
equipotential bonding.
6. Remove the sealing plug on the collec-
tion container (see chapter Selecting
the suction connection).
7. Insert the suction hose into the suction
connection.
8. Ensure that the suction connection on
the filter ring is tightly sealed with a seal-
ing plug (see chapter Closing the suc-
tion connection).
9. Check the filling level in the dirt recepta-
cle (see chapter Check the dirt recepta-
cle filling level).
10.Empty the dirt receptacle if necessary
(see chapter Emptying the dirt recepta-
cle).
11.Plug the desired accessories (not in-
cluded in the scope of delivery) onto the
suction hose.
12.Ensure that the dirt receptacle is cor-
rectly fitted.
22
Selecting the suction connection
The device is equipped with 2 suction hose
ports.
● Suction hose port on the dirt receptacle
– Dry vacuuming with wet separator:
Fine dust, powder
The dirt receptacle with wet separation
function must be filled with the inert liq-
uid water or oil. Oil with order no. 9.990-
272.0 is recommended.
● Suction hose port on the filter ring
Is tightly sealed with a sealing plug when
used as intended.
Closing the suction connection
WARNING
Risk of injury
Damage to the skin, lungs and eyes
through fine dust
The suction connection must be closed us-
ing the sealing plug after removing the suc-
tion hose.
Illustration B
1. Insert the sealing plug precisely into the
suction connection.
2. Push the sealing plug in all the way to
the end stop.
3. Turn the sealing plug to the right until the
suction connection is tightly closed.
Fill the dirt receptacle with inert
If a dirt receptacle with wet separator is
used, the dirt receptacle must be filled with
inert liquid before use.
English
Two suction hoses
must not be con-
nected to the vacu-
um cleaner at the
same time. Only the
lower suction hose
port may be used
when used as in-
tended.
The upper suction
hose port must be
tightly closed when
using the wet sep-
arator.
liquid