Autel Robotics EVO II RTK-Serie V3 Schnellstartanleitung Seite 7

Speaker Hole
Tripod Mount Hole
5. CHARGING
(1)
Aircraft Battery: Plug the charging connector into the battery's charge
port, and connect the other end to power adapter. Plug the power
adapter into a power outlet (100-240V AC).
(2)
Controller: Connect the charging cable to the USB port at the top of the
controller, and the other end to power adapter. Plug the power adapter
into a power outlet (100-240V AC).
NOTE:
•
Always fully charge the aircraft and smart controller
batterybefore flying.
•
It takes approximately 90 minutes to fully charge the aircraft
battery,and 120 minutes to charge the controller.
Air Vent
Bottom Hook
6
Grips