Autel Robotics EVO II RTK-Serie V3 Schnellstartanleitung Seite 10

9.PREPARING THE CONTROLLER
(1) Unfold the antenna, detach the stick
heads on the back of the controller
handle, and screw them into the
corresponding screw holes on both
sides of the screen.
(2) Adjust the antenna angle, and when the antenna and the back of the
controller are at the angle of 180 or 260, and the antenna surface is
facing the aircraft, the signal quality of the aircraft and controller will
reach the optimal condition.
10. POWERING UP
(1)
Press and hold the power button for
2 seconds to turn on the controller.
100
o
9