Becker Centronic TimeControl TC52 Bedienungsanleitung Seite 55

Operating Instructions
PROGRAMME
PROG1/ INDIVIDUAL WEEK (Individual switching time
PROG1/ INDIVIDUAL BLOCK (Individual switching time
PROG1/ INDIVIDUAL INDIVIDUAL (Individual switching time
PROG2
INDIVIDUAL
1. Press the MENU button.
2. To select the PROGAMME menu, press the + button until PROGAMME appears.
3. Confirm by pressing OK.
4. Press the + button until PROG2 appears.
5. Confirm by pressing OK.
6. Press the + button until INDIVIDUAL appears.
7. Confirm by pressing OK.
8. Now select the PROG2 INDIVIDUAL function you require using the +/- buttons:
INDIVIDUAL week
Press OK for the WEEK menu level (1-7). All further entries now refer to every day of
the week.
INDIVIDUAL block
Press OK for the BLOCK menu level (BLOCK 1 1-5, BLOCK 2 6,7). All further entries
now refer to BLOCK 1 (1-5) and BLOCK 2 (6,7).
INDIVIDUAL individual
Press OK for the INDIVIDUAL menu level (1,2,3,4,5,6,7). All further entries now refer
to every individual day of the week.
9. Now set the SWITCHING TIME
Confirm your entry by pressing OK.
10. Press the MENU button to switch to operating mode.
SWITCHING
WEEK
and the SWITCHING TIME
55
for week)
for block1/2)
for individual day)
TIME
PROGRAMME
using the +/- buttons.
SWITCHING
TIME