Stopping The Charging Process - Weidmuller AC SMART ECO Bedienungsanleitung

Operating the EV charging box

10.4 Stopping the charging process

The LED status indicator will be illuminated continuously blue and pulsing
during the charging process. You can stop the charging process before the
vehicle is fully charged.
SOCKET variation Both charging plugs will remain interlocked. The plug can only be removed
from the EV charging box once the plug on the vehicle is released.
Stopping the charging process without authentification
► To stop the charging process, observe your vehicle manual.
► Disconnect the vehicle from the EV charging box, see Chapter 10.3.
Stop charging after authentification via AC SMART App
► Start the AC SMART App.
► Select the EV charging box.
► Touch Stop charging process.
The charging process is stopped
► Disconnect the vehicle from the EV charging box, see Chapter 10.3.
Stop charging after authentification via RFID-Tag
If the charging process was started with an RFID tag, the RFID symbol on the
EV charging box will be illuminated continuously white.
► Hold the RFID-Tag in front of the interaction surface of the EV charging
box.
After successful authentification, you will hear a rising sequence of tones. The
RFID symbol will be illuminated white and pulsing.
The charging process is stopped
► Disconnect the vehicle from the EV charging box, see Chapter 10.3.
Stopping charging after authentification via web server
► Start the web server.
► Click Authorisation.
► Click Stop, to stop the charging process.
The status Disabled is displayed.
The charging process is stopped.
► Separate the vehicle from the EV charging box, see Chapter 10.3.
Operating instructions – AC SMART 99