Product Modifications - Weidmuller AC SMART ECO Bedienungsanleitung

► Carry out a visual inspection and create an acceptance protocol before
initial commissioning.
► Observe the requirements for the installation site, see Chapter 15.
Incorrect installation may cause water to get into the product. This could
result in an electric shock.
► Only operate the product if it has been assembled and installed as de-
scribed in the assembly and installation instructions.
► The IP protection class is only achieved if the product is assembled and
installed as described in the assembly and installation instructions.
► Do not use a pressure washer to clean the EV charging box.
► Only clean the EV charging box with a soft, lightly moistened cloth.
Risk to life due to fire
Foreign objects or dirt in the plug contacts can cause a fire.
► Check the plug contacts for foreign objects and contamination.
► Do not insert any objects into the plug contacts.
► Remove light contamination, for instance dust or sand, by blowing it out.
► Heavy contamination must be cleaned by an electrician.
CAUTION!
Risk of injury if product is damaged
A damaged or incomplete product can lead to malfunctions and hazards.
► Only use the EV charging box and its accessories if all parts are
undamaged.
► If you find damage on the EV charging box, commission an electrician to
disconnect the EV charging box from the power supply.
Risk of injury from falling parts
Falling parts can cause hazards and injure personnel.
► Do not place any objects on the installed EV charging box.
► Hang the charging cable on the cable tray when it is not in use.
2.4

Product modifications

The product may not be modified in any way. Product modifications interfere
with the safety and proper function of the product.
For your safety
Operating instructions – AC SMART 63