Function or setting option
Integrate EV charging box in a network (LAN/
WLAN)
Manage network settings
Configure authentification method
Adjust maximum charging current limit during initial
commissioning
Monitor charging process
Network settings Modbus RTU, Modbus TCP,
Bluetooth communication)
Configuration of digital inputs
Configuration of digital output
Configuration of an OCPP backend connection
Configuration of load/charge management
Firmware update
Set system time
Resetting the EV charging box to factory settings
Restarting the EV charging box
4.4
Charging the vehicle
Depending on the configuration of the EV charging box, charging is possible
without authentification (Freemode) or with authentification. If charging is
possible only after authentification, then the ways in which a charging process
can be started, interrupted, or ended depend on the authentification method,
see Chapter 9.3.
4.5
Status information and error display
The status of the EV charging box and any errors are displayed in the web
server and in the AC SMART App. The EV charging box is also equipped with
an LED status indicator.
4.6
Monitor charging process
The technical features of the charging process, such as the electrical values
for the individual phases, effective power, reactive power, apparent power,
mains frequency power factor, total power and device temperature can be
displayed in the web server.
Product functions
Web server
AC SMART App
–
–
–
–
–
–
–
–
–
–
Operating instructions – AC SMART
71