Error Codes - Weidmuller AC SMART ECO Bedienungsanleitung

Troubleshooting
Fault
The satellite box only
charges with the minimum
charging current.

12.3 Error codes

Error ID Description
1 The CP signal is invalid.
The fault could be caused by the
vehicle or the charging cable.
2 The PP signal is invalid.
The charging cable may be the cause
of the fault.
3 There is a diode error in the vehicle.
102 Operating instructions – AC SMART
Possible cause
The satellite box does not have a con-
nection to the control box. The satellite
box reduces the charging current to 6 A
until the connection to the control box is
restored.
Recommended action
► Disconnect the vehicle from the EV charging box.
► PLUG variation: disconnect the charging cable
► Wait until the LED status indicator is illuminated
► Connect the vehicle to the EV charging box once
► Start the charging process.
► If the error occurs again, try to start a charging
► If the error occurs again, contact an electrician.
► Disconnect the vehicle from the EV charging box.
► PLUG variation: disconnect the charging cable
► Wait until the LED status indicator is illuminated
► Connect the vehicle to the EV charging box once
► Start the charging process.
► If the error occurs again, try to start a charging
► If the error occurs again, contact an electrician.
► Disconnect the vehicle from the EV charging box.
► PLUG variation: disconnect the charging cable
► Wait until the LED status indicator is illuminated
► Connect the vehicle to the EV charging box once
► Start the charging process.
► If the error occurs again, try to start a charging
► If the error occurs again, contact an electrician.
Recommended action
► Connect the control box to the
satellite box.
from the EV charging box.
green.
again.
process with another vehicle or another charging
cable.
from the EV charging box.
green.
again.
process with another charging cable.
from the EV charging box.
green.
again.
process with another vehicle.