Installation; External View - Toshiba MMU-UP0091H-E Installationsanleitung

4

Installation

REQUIREMENT
Strictly comply with the following rules to prevent damage of the
indoor units and human injury.
• Do not put any heavy article on the indoor unit. (Even units are
packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in
the indoor unit unpacked by necessity, use buffering cloth or other
soft cloth to not damage the unit.
• To move the indoor unit, hold the hooking metals (4 positions) only.
Do not apply force to the other parts (refrigerant pipe, drain pan,
foamed parts, or resin parts).
• Carry the package by two or more persons, and do not bundle it
with plastic band at positions other than specified.
Model MMU- A B C
UP009, UP012 6.4 9.5 256
UP015, UP018 6.4 12.7 319
UP024 to UP056 9.5 15.9 319
205-EN
– 103 –
 External view
Ceiling bottom surface
Knockout square hole for branch
duct for Dia.150 (2 locations)
101 183
Knockout square
hole for branch duct
for Dia.150
129
105
Z
Ceiling bottom
surface
Z-sectional
view
Knockout square
hole for simple OA
for Dia.100
Ceiling bottom surface
Ceiling panel (sold separately)
80
Dia.162
240
105
105
840 Unit outer dimensions
Electrical control box
860 to 910 Ceiling opening size
408
416.5
690±20
Hanging bolt pitch
950 Panel outer dimensions
Knockout square hole for branch
duct for Dia.150
480
105
256.5
16.5
Knockout square hole for branch
duct for Dia.150
Ceiling bottom surface
Dia.162
172
Refrigerant pipe
A
connecting port (Liquid)
112
44
Refrigerant pipe
B Wiring intake
connecting port (Gas)
105
129 Ceiling bottom
surface
189
Drain pipe
connecting port
(Material: PP)
Hanging bolt M10 or W3/8 (Locally
procured)
Unit: mm
206-EN